Repair Manual

Audi RS 4 Sedan and Avant, service and repair manual

Audi RS 4 Sedan & Avant
drive, lifters, hydraulic, direct-injection petrol, aluminium alloy, torque control, catalytic converters, a stop lamp, the audi rs 4, broadcast system, the distribution of voltage valve technology, the exhaust valves, valve train, the cylinder block, the mass of air, 2007 Audi RS 4 Sedan. THE ENGINE:. Type spark ignition direct injection V8 FSI, manual trans. 3957 £ 1795 kg. Distribution:% front/rear

The Contents Of The

2007 RS 4 Sedan technical specifications
Technical specifications of the 2007 Audi RS 4 Sedan
ENGINE:
Type spark-ignition engine with direct injection V8 FSI, 4-valve technology, two light alloy cylinder heads, both with double overhead
drive (DOHC), two inlet valves, two valves which are cooled exhaust sodium intake manifold with integrated charge flow
and naturally aspirated High-revving to 8250 rpm installation. /min
Preparation of management/mixture of fully electronic gasoline direct injection of air mass measurement, mapped ignition with solid-state high voltage distribution
continuous adjustment of the cam for intake and exhaust valves, Bosch MED 9.1 coordinated torque control
Understanding front-mounted
3.33 Inches Bore 84.5 mm
Stroke inches 3.65 92.8 mm
Displacement of 254 cm cu 4163 cc
Compression ratio 12.5: 1
Fuel requirement premium unleaded petrol Ron > 91
Power (DIN) 420 hp @ 7800 RPM. /min
Max. Torque 317 lb ft @ 6000 RPM. /min
THE DESIGN OF THE ENGINE:
Aluminium alloy cylinder block
Aluminium alloy cylinder head
Valve train/intake camshaft adjustment, the intake of the chain-driven DOHC 4-CYLINDER, hydraulic lifters
Cooling radiator fan, thermostatically controlled system
Lubrication system of gear Pump, under pressure, the full flow from the oil cooler
Direct injection fuel injection FSI
Emission system of two manifolds required two basic catalytic converters, two underfloor catalytic … major

download