Wednesday, April 6, 2011
Installation instructions for Volvo S/V40 scanner Bc.
Installation instructions:
1) first of all, read the instructions on the whole at least once. Turn 2) ignition disable and remove the key 3) Remove bonnet 4) the establishment of a pipe in the upper part of the engine, as it should be after. 5) Fuel injectors are not normal fuel injection Bosch connectors prepared in tubes. 8 connectors are paired up sex. The principle is to combine the field between the fuel injectors and the original pipe through a pair of men and women connectors. This is also our + 12V power supply. 6) Cam sensor is not a connector Bosch. Skin blue wire from sensor and white cables in BC Feb-wires to it. We need to just "listen" to the signal to determine the Rev. /min. Line runs between the engine firewall. 7) Boost control valve (B) boost control valve is connected to the prepared connectors (B). Link field to the original harness and valve control pulse. 8) Map sensor combine original sensor MAP before the throttle. The sensor is located on the pipe between the doladowanego and the throttle. We have to "listen" to the signal. Peel the Brown wire from sensor and blue/green wire solder in BC-wires to it.Download
