Dodge, Ford, Chevrolet transmission removal, installation and testing manuals
The negative Battery Cable, ford, chevrolet, link shift, shaft loom, control cables, shift lever, skid plates, neutral, time check, yoke, collar, axel, lateral, Dodge, ford, models. 1 disconnect the negative battery cable), delete the sampler, place the transmission shift lever in neutral. Elevation and maintenance of the vehicle. 2) Remove all plates skid necessary equipment. 3) remove any of the engine to the transmission of transverse (if equipped), and any exhaust components required to
receive transmissions. 4) Mark shaft and flange axel or yoke to reassembly references and remove the drive shaft (s). 5) On all models, Disconnect all the connections, wiring harnesses and shift control cables.
Do not delete the transfer of all the way, only a few inches (1-3) at a time. Make sure that everything is disconnected and clear. Elevation and maintenance of the vehicle (if not already done). Make sure that the shift lever is in neutral position and the negative battery cable is disconnected.
here
