Thursday, May 26, 2011

Timing belt removal and Installation Guide for Suzuki

If traffic is required to exercise extreme caution in order to avoid damage caused by the piston. 1. Disconnect and isolate the battery ground cable, 2. Loosen the belt drive, remove the bolts securing the fan and radiator fan Shroud and fan. 3. remove the fan Shroud. 4. remove the accessory drive belt and pulley water pump.

Cams zebnik timing mark. SOHC 1.3 L models built before June 1993 crankshaft timing belt pulley bolt holes, Punch mark, arrow, crankshaft timing belt. Valve lash adjustment. 1.3 1994 and earlier L SOHC engine. In models, follow this guide sidekick: Install the fan Shroud.


here