Monday, June 13, 2011
Audi A4 brake installation manual
The steps for this Audi A4 brake installation manual
PREPARATION FOR INSTALLATION
1. be sure that the vehicle is parked on the level of the concrete and the parking brake.
2. Place a stop in front of and behind the rear tires.
3. the user to the correct procedures for the removal of wheels and lifting before lifting the front of the vehicle.
4. instead of jack's vehicle for added stability.
5. remove the wheel.
6. position the clamp on the brake lines brake pipe. This minimizes the loss of brake fluid.
7. using the 11 mm key, disconnect the brake pipe from the caliper. Keep in mind that the brake fluid may escape from the line once disconnected.
8. disconnect the bushing sensor ABS bracket bracket by pulling straight up.
