Monday, June 13, 2011
Forge Motorsport Golf 1. SEAT Leon 1, 8T. 8T and Audi A3 1, 8T DV installation guide.
Tools required:-Cross head screwdriver, screwdriver flat blade, 6 mm and 7 mm hose
clip the driver, a sharp knife.
1/Open the bonnet/hood. Remove the plastic cover of the engine. Delete the hose between the body and the highest Intercooler connection (lower-left corner of the image above)
2/Fit new hose with spout, 25 mm, as described above. The hose is too long, it will probably become deformed, if this happens, and then remove and simply cut ends with a sharp knife, remove only 10-15 mm in any time to check and correct the shape of the hose after each reduction needs. Once happy teammates then safely with hose clips shipped.
3/3-way valve Now delete your location from the original input channel in the Turbo and he went into the transfer hose, as mentioned above. Ensure that the hose clip, he adds.
4/the use of the plastic bends 90 degrees and straight 25 mm hoses to the completion of the hose between the Turbo intake manifold and a new location. With hose clips delivered and secure connection all hoses, once you are satisfied with their size and it's done. Fit the plug of 25 mm to erase the original hose reinforcement DV and safely with a hose clip. (If you have a spare hose of equal length, provided you can remove the amplification of the hoses and place a short length of 25 mm silicone hoses and empty as the two images)
5/the use of vacuum tubes and joiner, delivered with a view to extending the original vacuum tube DV, DV to the new location, correct the vacuum pipe to the top of the DV, as shown above. Using zip ties, supplied clean up 25 mm hose, and any other components of the engine rubbing through.
6/the adjustment of the engine cover. Delete all of the tools, and then close the bonnet/hood.
