Wednesday, June 22, 2011
Toyota Rav4, Corolla, Prvia, Avensis tab control
Head Unit adapter from the list, select back and connect it to the USC black box. Turn off power to the ignition of the car!
Remove the head body and identify the audio connector of the OEM, and make sure that the connector correctly buddies cable with 29 series.
Find the 20 pin connector to the steering control. Plug the cables into a series of 29, and the ISO connector for new radio.
Verify that the Red wire is 12V ignition switch and then turn on the ignition Test unit before fully radiocommunications equipment and go back to TRIMS. If the problem: Verify that the correct adapter and the links are in the correct location. Always disconnect the power supply, if you change the lead head unit adapter. Check that the Red wire is 12V ignition and stable power supply. Check whether the head of the unit and grounded the black wire is Earth. Verify that all connections are the same as the wiring is shown below.
